AB7649-F Ethernet Slave Profinet Slave Siemens Fanuc

Hello, I am trying to configure an anybus gateway (AB7649-F) as an Ethernet slave to a Fanuc Robot.

Is there a complete walk through on this process?

We have configured the anybus as a slave/slave with 20 bytes in and out.
The devices are able to ping back and forth.
We have added the device as an adapter on the fanuc, but are unsure of what to do next in order to get these units to pass data.


Have you tried this page:


and there are some videos that may be helpful here:

Let us know if you have any more questions.

Thank you,

Topic closed due to inactivity.