AB7651-F and c# library s7NetPlus

[gcaggese]

I have a gateway AB7651 - profinet I/O-slave connected on one side to the siemens s-1200 plc network and on the other side to the corporate ethernet network.
With supervisory software on PC using the c# s7.net libraries,
is it possible to reach and communicate with the plc through the gateway?

if yes, which configuration?
thank you very much

[kyle_HMS]

You can connect with any PROFINET compatible controller. I’m not familiar with the c# s7.net libraries you mention. However, we do have a PROFINET Master Simulator you could use: PROFINET Master Simulator