AB7802 - DN/S to PB/M


#1

@anonjbludywc
Hi Amir,

Can you make sure you are using this right version of NetTool here: https://www.anybus.com/support/file-doc-downloads/x-gateway-specific/?orderCode=ab7802

Once you are able to connect to both PB serial ports you will be able to see which devices are online. Let me know if you have any problems.

Thank you,

Kyle


#3

Dear Kyle

I managed to monitor the Profibus at the same time and there was no problem whatever I send from Sinamics s120 VFD I can see it in the gateway Profibus Side but on the other side Allen Bradelly PLC we can’t see and DATA even though the PLC can communicate with Gateway and there is no errors

I have exactly the same problem on 2 Gateways ( DeviceNet Slave/Profibus Master ) and (controlNet slave/Profibus master )

Attached the config for both side


#4

#5

#6

#7

www.siemens.com/ingenuityforlife