We bought AB7832-F(Article No), which Profibus and Ethernet/IP Modules.
I have ABB PLC, which will be connected in Profibus Port in Anybus Module and Siemens PLC, I will be connecting in Ethernet/IP port
Kindly let us know, above model will support for Siemens Communication or not?
Regards,
Sukumar.T
This device does support connection to Siemens PLC. Here is are datasheet on the device is you have more questions on what is supports.
-Zach
Hi,
Attached Manual shows Ethernet to Profibus DP and Ethernet to Ethernet
The Model which I have Profibus DP and Ethernet/IP and I have found GSD file in the website which is not suitable for Siemens PLC and sees GSD picture file for your reference as well and it mentioned EDS file which we use for Allen Bradley PLC, not for Siemens PLC.
Kindly required your support.
Regards,
Sukumar.T
Hi Sukumar,
Siemens generally uses Profibus DP for their communications which is what this device supports. What are the protocols that each of your devices are using. It may be that you have the wrong device.
-Zach
Hi,
I have Two PLC, ABB, and Siemens.
I am using Profibus DP in ABB PLC and Profinet in Siemens PLC.
With the above PLC, can we use Anybus gateway AB7832-F ?
Regards,
Sukumar.T
The one you have will not work with those protocols. What you would be looking for as a Profibus slave to Profinet slave x-gateway.
https://www.anybus.com/support/file-doc-downloads/x-gateway-specific/?orderCode=AB7652
