Analogue Inputs to

Ewon Support Ewon Flexy
#1

Hi,
I’ve got a Micrologix 1400 with four analogue input expansion modules in slots 3, 4, 5 and 6. I am able to get correct readings from the first input of each module (I:3.0, I:4.0, I:5.0 and I:6.0) however the other inputs are giving incorrect figures (I:3.1 - I:3.3, I:4.1 - I:4.3, I:5.1 - I:5.3, I:6.1 - I:6.3)
The inputs are not moving as the actual data moves, indicating that the scaling factor isn’t the issue here.
Is there any possible explanation as to why the first input from each module is working properly but the others are not?

Thanks.

#2

Hi Mark,

Is there any way I can jump on a teamviewer and take a look at the setup for this?

-Tim

#4

Hi Tim,
Yes that’d be good. I’m still trying to get proper visibility for a number of variables in the PLC.
Thanks

#5

Hi Mark,

Let me know when you’re ready for us to take a look

#6

Thanks Tim. I’m good any time.

#7

Hi Mark,

Can you send me your teamviewer info when you’re ready?