Anybus M40 connection to PC Issue

Anybus Support Embedded
#1

Good afternoon,

I would be very grateful if someone could help me. I am currently trying to connect a processing equipment to my PC. The computer has an Anybus M40 installed. I connected an ethernet cable from the M40 to my PC and entered the IP address, but have been unable to make the connection.

I don’t know much about this.

Thank you very much.

#2

Hi @rsrangel ,

I recommended reaching out to the OEM of the device the m40 is used in. They should be able to provide more details on how they have the m40 setup.

The m40 does have a web page, you should at least be able to enter that into your web browser. Be sure you have an IP in the same range as the m40.