CAN-CAN bridge from IXXAT (how to upload cfg file from existing device)

I have a CAN-CAN bridge and needed to be able to upload the cfg from this bridge to download to a new one I just bought. Using gateway configurator, I don’t know how to connect to the existing bridge and upload. Help.

Unfortunately with the original CANbridge there seems to be no way to upload the configuration. I am going to verify this with some colleagues.

With our latest CANbridge hardware, the CANbridge NT, you can do uploads.

https://www.ixxat.com/products/products-industrial/gateways-and-bridges/canbridge-nt-200-420

I will let you know once I have verified this.

I confirmed that you cannot do an upload, but this is what a colleague suggested.

  1. Unfortunately the upload of the existing CANbridge configuration is not possible.
    Using the CANbirdge you can only read the name of the loaded “ConfigAlias”
    using the “-v” parameter for CANbcfg.exe
    See the attached CANbridge manual.

  2. The “*.CFG” configuration file of the CANbridge can be imported
    into the CAN-Gateway configuration for the CANbridge NT.