Can not find ABC3013 in TIA Portal

Anybus Support Anybus Gateways
#1

Hi,

I’m following this tutorial on how to set up the Anybus Communicator in TIA Portal:

But I’m getting stuck at 2:05 where I’m supposed to Assign Device Name. TIA Portal can not connect to the unit.

This is a screenshot from the video, showing how the system is set up:

image
image809×626 77.2 KB

And this is my set up:

image
image763×583 28.8 KB

This is how it looks like in TIA Portal for me when trying to Assign PROFINET name.

image
image824×607 24.9 KB

I’m a complete newbie in this, so I don’t blame you if you have any follow-up questions regarding this issue. I am 100% certain that I’m missing something completely obvious. :partying_face:

Can you help me?

Best regards,
Christian

#2

Looking at the screen shot it looks like the profinet side does not see a link. Double check that one of the two profinet ports are connected to the network. The top most port is the config port the two below are for profinet.