CompactCom M40 / Profinet

Hi,
I bought a dev kit for M40 profinet and I have some troubles to start with.

I need to use your M40 profinet module through SPI link can’t find some example code or schematic to use it.
Can you provide that kind of informations ?

Thanks.
Have a nice day

You will find support material for the Starterkit at the following link,

https://www.anybus.com/support/file-doc-downloads/starterkit40?ordercode=ABCC40STK

Also, you can download our SDK at the following web page,

https://www.anybus.com/products/embedded-index/anybus-compactcom-starterkit

This SDK includes different options based on your embedded platform. For using the starterkit you will want to use the windows platform.

Thanks for taking time to respond.
But, I already have these files (SDK). But I am not able to start using the profinet module (without the dev kit base board) through an SPI link.
In your SDK example code, there is no SPi code related.

I am not sure I understand, you are not using the starterkit board? There is code in the SDK that is specific to SPI.

This document actually goes over some of the SPI specific implementation details as well as other start up specifics.

Your dev kit is divided into four parts, the main base board (with the fpga), a connector boards and two mezzanines (profinet and dual rJ45 connector).
In order to test the profinet module I don’t use the base board but only the others. I connect my processor by SPI thanks to the headers on the connector board.

I am reading the previous documentation.

I am coming back later.
Thanks