Device access within a local area network

Can I use the Ewon cosy 131 to access a device (for example, a PLC) on the factory floor from my PC in a different location, but still within the factory and on the same factory network?


Hi Colm,

Yes you can do this. If your computer is on the Cosy’s WAN network (the network it is getting internet from) then you have to enable NAT 1:1 and give the PLC a static IP on that network. Here is a document on the process.
How to reach a device behind the Ewon Cosy 131 from a PC on the remote site.pdf (488.8 KB)