Ewon Cosy 131 / Bridge mode disabled for WAN

Ewon Support eWON Cosy
, ,
#25

Hi Juliana,

I’m trying to put together a network topology drawing for our customer (at Site #2), that fits the NAT 1:1 instructions you suggested to me.

I’m unclear on how the Site #2 PLC will be able to “see” the VPN network via the customer’s LAN network (10.0.0.x). Please have a look at the drawing below and let me know how the physical hardware should be connected at Site #2, and how the IP addresses need to be entered in the NAT 1:1 configuration to suite.

Please see the hand sketch drawing below;

image
image1053×665 48.7 KB

Thank you Juliana,
99bobster99

#26

Hi @99bobster99,

I reached out to the rest of my team regarding your case, and at this point the NAT1:1 I previously suggested would not work for your application. The best solution for your case would be acquiring 2 flexys 205 and connecting both sites (using 1 flexy per site). Please see the following document for more information: Linking 2 Sites Together Using VPN (windows.net)

For applications like yours, we used eFive 25; however, this is no longer supported by HMS: Ewon Technical Support - eFive

Sorry again for the confusion.

Best regards,
Juliana

#27

Hi Juliana,

Thank you for letting me know!

I’ll check into the Flexys 205 option you mentioned.

Your help has been excellent Juliana, thanks again for your assistance!!

Best Regards,
99bobster99

#28

Hi @99bobster99,

My pleasure! Glad to help.

Best Regards,
Juliana