I have been using a Flexy 205 in conjunction with an Adam 6052 counter to pull sensor data off of one of my production lines.
Today I ran out of I/O on the counter and decided to use the I/O built into the flexy.
When creating an EWON tag on the flexy, the sensor triggers did not show up in the tag however when using the counter I/O I was able to get a signal.
There is not a lot of documentation that goes into depth on using a EWON tag, and the video on the EWON Support site is listed as private: Local Data Acquisition
Any help would be appreciated in getting I/O through the local I/O ports on the flexy.