eWON NAT 1:1

Hi

Is it possible to NAT LAN Network IP to WAN, Which are connected through M2M. there is no efive installed. both side is having eWOn Flexy 202.

Hi @nezilharshan,

Here’s a little guide I made that goes over doing a NAT 1:1 conversion from the LAN side to the WAN side

NAT 1to1 without vpn.docx (685.6 KB)

Let me know if you have any questions

-Tim

Hi,

given document i cant able to download . can you please send to nezilharshan@deltacontrols.ae

Let me try and rehost it on our fileshare to see if that works. If it’s still having issues after that I’ll send it directly.

https://fileshare.hms.se/?container=F7ee9Je8uf5Lq67z5hp6yX53k3Wp33D3NX2mp4KT22R8D

Hi Tim

i cant use NAT 1:1 configuration, because i am using M2M (private APN) sim card. I am trying to communicate using proxy configuration. but cant able to reach PLC remotely . i can able to ping WAN IP both side . attaching the screenshots FYI.

Are you trying to reach devices on the WAN side through the VPN?

Dear Team

I have clearly mentioned my previous post . i am using private APN sim card. I need to reach local station ewon lan network from remote site .both sites are having ewon flexy device . i can bale to ping local station SIM card ip from remote site .but LAN traffil not able to reach . is there any solution you can provide will be grateful.

note: Private APN does not have an internet connection.

Can I take a look at this over TeamViewer with you?

https://s3.amazonaws.com/hms-networks-s3/original/1X/HMS_QS.exe

-Tim

Dear Tim

Tomorrow is holiday here .is it Okey Sunday 10.00 am UAE time for remote session.

Regards
Nezil Harshan

Hi Nezil,

We’re available from 8AM-5PM EST from M-F. If you create a ticket here though you should be able to get in contact with local support.

-Tim