Filezilla serveur and flexy ftp

Ewon Support Basic and Java
#1

good evening, I have to transfer a csv file every week from my flexy to my ftp server and I have the problem below

(000074)24-05-19 23:56:39 - (not logged in) (109.88.37.125)> Connected on port 21, sending welcome message…
(000074)24-05-19 23:56:39 - (not logged in) (109.88.37.125)> 220-FileZilla Server 0.9.60 beta
(000074)24-05-19 23:56:39 - (not logged in) (109.88.37.125)> 220-written by Tim Kosse (tim.kosse@filezilla-project.org)
(000074)24-05-19 23:56:39 - (not logged in) (109.88.37.125)> 220 Please visit https://filezilla-project.org/
(000074)24-05-19 23:56:39 - (not logged in) (109.88.37.125)> USER wjm
(000074)24-05-19 23:56:39 - (not logged in) (109.88.37.125)> 331 Password required for wjm
(000074)24-05-19 23:56:39 - (not logged in) (109.88.37.125)> PASS *********
(000074)24-05-19 23:56:39 - wjm (109.88.37.125)> 230 Logged on
(000074)24-05-19 23:56:39 - wjm (109.88.37.125)> TYPE I
(000074)24-05-19 23:56:39 - wjm (109.88.37.125)> 200 Type set to I
(000074)24-05-19 23:56:39 - wjm (109.88.37.125)> PASV
(000074)24-05-19 23:56:39 - wjm (109.88.37.125)> 227 Entering Passive Mode (192,168,0,26,197,94)
(000074)24-05-19 23:56:39 - wjm (109.88.37.125)> STOR /essai/DATA_JURBISE24_05_2019.csv
(000074)24-05-19 23:56:39 - wjm (109.88.37.125)> 425 Rejected data connection for transfer of “/essai/DATA_JURBISE24_05_2019.csv”, IP addresses of control and data connection do not match
(000074)24-05-19 23:56:39 - wjm (109.88.37.125)> quit
(000074)24-05-19 23:56:39 - wjm (109.88.37.125)> 221 Goodbye
(000074)24-05-19 23:56:39 - wjm (109.88.37.125)> disconnected.

++
kirty

#2

You might need to open ports on the router for passive FTP. Can you provide some more information, like where is the Flexy located, where is the FTP Server, how are they routed, etc.?

#4

good evening I have a flexy 205 in test at home on my internet connection, and ftp is on my pc.
I need to repatriate +/- 50 Flexy (201 and 205) data on an ftp.
I tested the server from the outside and it works perfectly!

++

kirty

#5

Have you made sure that you are forwarding the ports for FTP passive mode? Or disable passive mode? It sounds like this is an issue with your network or FTP server and not the Flexy. If you google “filezilla server error 425” you should find the info you need.

#7

Good evening, after many tests it works I changed provider for the flexy and everything worked

Thanks again

Kirty