Hello,
I have a customer who has a Fley 205 that randomly started dropping communication on LAN. They tried doing a factory reset and had no luck. User is reporting a flashing green USR light, which would indicate a conflicting IP, but this is not the case.
They can not see the eWON in Ebuddy except for during attempted recovery. Which appears to finish but then fails on the final step stating: “the eWON is not detected”. I did confirm they used a switch in between the computer and the eWON.
All these tests were made with no expansion modules plugged in. As an additional test, I had the user manually change their IP to the same subnet as the default eWON IP and they were still unable to ping the unit.
I wanted to see if there was anything more to check before sending it in for a repair.