Hi,
- Logs attached *
Target: Access LAN camera video feed from public internet, using public IP address + port forwarding.
Camera NVR LAN web-interface: 10.0.0.60, fully accessible from another computer connected to Ewon LAN side.
I made a proxy rule: TCP - EXT to LAN - 8081 - 80 - 10.0.0.60
I followed this guide: https://forum.hms-networks.com/uploads/short-url/4q4bqGGf52F54ZLOSxMUGULwV1J.pdf
I also tried few things mentioned here: HTTP Port Forwarding - #2 by kyle_HMS
But no success.
My proxy page:
 image1218×270 22.8 KB](https://forum.hms-networks.com/uploads/default/original/3X/5/9/59418e9a4e03ef196bc2ce1dc003756e2594cb4f.png){kind=link}
My routing page:
 image1243×569 33.8 KB](https://forum.hms-networks.com/uploads/default/original/3X/9/f/9faec9b0295c74319e3c1bc0cf25db5a810b3314.png){kind=link}
If I set routing
- “NAT on LAN (Plug’n Route)” → No internet on LAN devices
- “NAT and TF on WAN” → Internet access OK from LAN, but still no port forwarding
I use FLB3204 Ewon 4G card, connection OK. Public IP was activated from operator side (Elisa Finland) and it required to change Internet APN to “internet4” → Done.
Another question: Why my WAN IP adrdress on **summary-**page is different than shown in https://whatismyipaddress.com/ ? I’ve tried both for remote access, no success.
Best regards, Simo
MOVED TO STAFF NOTE (74 KB) MOVED TO STAFF NOTE (72.5 KB)