Flexy 205 with 3205 modem

Ewon Support Ewon Flexy
#1

Did you guys change FW on 3205 modems …when Flexy powered with 3205 modem installed, I get just a blinking red USR LED nothing else…no LAN ports enabled…nothing…Take 3205 modem out of slot, apply pwr, seems to boot normal

I’m trying to install files via SD card but can’t even get boot up and USR LED to be steady green.

Use 3202 modem…everything boots up fine

Please assist.

Chris

#2

can you try removing the cards from the flexy and updating the device to firmware 13.2s1 using the steps described in the post below. After that try reinserting the card and see if it comes up like normal

#4

What is user name password

Chris Brodeur

#5

default should be adm adm

#6

Thx

Works now

Chris Brodeur