Flexy io servers

How many devices can one flexy have set up to collect data from?

@Joe_Stoltz

If you use the built in IOServer topics you would be limited to 3 however you can map the tags to a specific device at the tag level. In doing it that way, you don’t have a limit to the number of devices you can poll from.

so create the “Modbus TCP” device, and then within each tag point to the specific devices IP address from where that tag resides? Ill try this out. Thank you!

@Joe_Stoltz

That is correct, simply specify the IP in the tag level. Also, ensure to enable one of the IOServer topics but do not specify any settings. That simply tells the eWON to enable modbus comms.