Flexy with A-B MicroLogix 1100 via Ethernet

Eduardo_Giancristofa · September 4, 2018, 2:44am

Hello guys,

I found this in the Flexy manual, and I believe that means the Flexy can talk to a MicroLogix 1100 using the Ethernet port and the DF1 driver. The manual only mentions SLC500 and PLC-5, so I am asking if you ever heard of this possibility.

system · September 4, 2018, 2:50pm

Eduardo_Giancristofa · September 4, 2018, 2:53am

Sorry, I forgot to attach the image.

jseanor · September 4, 2018, 3:02pm

@Eduardo_Giancristofa

Yes you can absolutely use the DF1 driver for a Micrologix. Simply enter the IP address into the topic config. You do not need to specify a device type or node here. Just the EIP destination is required.

Nan_Gutierrez · March 10, 2020, 8:41pm

Hi!
Is there any document or guide on how the Ethernet connection is made?

Tim_hms · March 10, 2020, 8:52pm

Hi @Nan_Gutierrez,

I believe you just need to go in here and add the connection

These 2 documents talk about adding micrologix devices as well: