Hi, how I need to configure CanAnalizer v3 to work with a Can@net 420 Ethernet to CAN interface, I can’t configure it as a controller
The canAnalyser V3 mini and the canAnalyser V3 Lite & Standard access the VCI API and can be used with all CAN interface boards (USB-to-CAN V2, CAN-IB200/PCIe, CAN@net NT …).
Please note, for the use with the canAnalyser V3, the CAN@net NT has to be configured for the VCI-Mode (using the CAN-GW-Configurator) and the CAN@net NT has to be added and started in the “VCI device server control”.
It’s configured as VCI:
I installed the VCI drivers all the options v. 4.0.939.0
and no controller available
Regards
The CAN@net NT seems to be configured for VCI mode in the CAN-GW-Configurator, but is the CAN@net NT added and started in the "VCI device server control“ as described in the VCI V4 installation manual?
The CAN@net NT will appear in the canAnalyser V3 only if it is started in the "VCI device server control“
Were you able to get it working?
Hi Kyle Yes thanks for your help the VCI server was not started
Great - thanks for the update.