Mapping my Siemens 1200 PLC using TIA PORTAL 14 SP1

Ewon Support eWON Cosy
#1

I got a eWON Cosy 131 already configured at work. The talk2m connection is permanent active. What I trying to do is stablish a connection with my PLC from home but I get confused (first time do it) because if I want to go online over my project through TIA PORTAL. How Do I set up this connection??? because asked me:
1.- type of the PG/PC interface: PN/IE
2.- PG/PC interface: in this part Do I have to install a Virtual Adapter
because it won’t connect with the adapter I have on my list.

but If I see on my command prompt I see this adapter active

Ethernet adapter Talk2m-eCatcher:
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::6136:739a:2eec:f43f%24
IPv4 Address. . . . . . . . . . . : 10.213.53.7
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :

I appreciate the info

#2

Hello, you should just be able to use the tap v9 adapter that gets created when you install eCatcher.

Can you take a look at pages 20-24 of this document:

#4

Thanks I will do that