NAT 1:1 on Flexy 205

[Lisa_Mosquera]

Can you provide instructions on how to set up NAT 1:1 with the new user interface on the Flexy 205.

Thanks,
Lisa

[hms_support]

@Lisa_Mosquera

The NAT 1:1 setup is identical to the previous Flexy but navigating to the view is different.
NAT 1:1 is located here: Setup / System / Communication / Routing

For instructions on setting up the NAT 1:1 table, and security parameters, please see the following topic:

NAT 1:1 on the Flexy

Hello Luke, Certainly! The first step we will want to do is to enable NAT 1:1 on the Flexy. To do this, navigate to Configuration > System Setup > Communication > Networking > Routing and select the Enabled checkbox next to NAT 1:1. [image] NEW LOOK! [image] Next, you would select “NAT 1:1 on WAN” from the Mapping drop-down menu and configure your translations in the table that appeared after enabling NAT 1:1. You would want to put the LAN IP of the device under “Device IP (LAN)” and the WA…

[Lisa_Mosquera]

Thank you!