PLC Siemens Profinet communicates with ethernet ip devices

I want communicate PLC siemens profinet with 4 soft starter Rockwell Ethernet IP. Would the AB7670 gateway work?

Hello @ThalesGuedes,

The AB7670 is a Ethernet/IP scanner to Profinet IO device. This will allow you to setup class 1 Cyclic connections to the Ethernet/IP device and allow your Siemens PLC to connect to the Profinet side. This should allow you to control the drives.

I recommend reaching out to your local distributor for additional details such as pricing and availability. Find Anybus Distributors | Anybus

Hello,

What about going from AB E/IP 5069 PLC to Siemens et200m rack with PN head module (i.e. no s7300 CPU)…?

Would that be the AB7504 or the AB7649?

Thank you

Those are both PROFINET devices, not controllers, so you would also need a PROFINET controller on the PROFINET network to communicate with the Anybus.

The only difference between them is the AB7504 supports IRT (isochronous real time) and the AB7649 only supports RT communication.

Thank you for prompt response. Does Anybus offer gateway that acts as a PN controller?

Unfortunately, no. We do not have one at this time.