RE: intesisi to daikin BACnet @ LAUSD

From: Richie Lovorn <richie@westover-usa.commailto:richie@westover-usa.com>
Sent: Friday, April 24, 2020 7:39 AM
To: ‘erd@hms.se’ <erd@hms.semailto:erd@hms.se>
Subject: intesisi to daikin BACnet @ LAUSD

Hello I was given your contact info from Moe with MechTech to try to help us get this unit connected to our BACnet EMS system at this school in Los Angeles. Can you please contact me ASAP I am on site today trying to take care of this.

Daikin unit # FDMQ24RVJU
Daikin Wired Remote Controller # BRC1E73 wired into P1P2
The interface is in Master setting as it has to be for our BACnet interface. In Slave setting it crashes our BACnet communication. In Master I’m able to see it on our system but the P1P2 communication fails between Intesis Interface device, Daikin unit and Daikin wired remote controller. On the Intesis LED1 is steady red and error code U5 is displayed on the Diakin Wired remote controller. No cable was provided with this unit. We pulled 2, 18g tffn wires from wired remote controller to unit P1P2 and 2 more 18g tffn wires from unit P1P2 to the intesis and we have purchased a usb power supply to a wall box like a cell phone charger powering the intesis.
Intesis Interface INBACDAI001R000

Is there a setting on the unit I have to change? Or a factory cable between the interface and the unit? Or are we missing something here?

Richard Lovorn
Superintendent
Office: 818-565-0033
Fax: 818-565-0039
Cell: 303-601-5080
[/uploads/default/original/2X/6/63dabd023c04e6395fa1de5f940a17d95eeba0c0.png]


[Avast logo]https://www.avast.com/antivirus

This email has been checked for viruses by Avast antivirus software.
www.avast.comhttps://www.avast.com/antivirus

intesis convo pt.1.pdf (574 KB)

Intesis convo.pdf (635 KB)

2 posts were merged into an existing topic: FW: intesisi to daikin BACnet @ LAUSD