Remote Configuration of Flexy-205

Ewon Support Ewon Flexy
#1

I need to setup a new Flexy-205 remotely. Can we do this by shipping an SD card or emailing a file to the location where the Flexy is installed?

Need the following to be configured by an SD Card or (emailing a file):

  1. New Flexy-205 needs to be associated with our Ecatcher account
  2. WAN Network info configured
  3. LAN Network info configured
#2

Yes, if the device is not currently tied to an account you can use an sd card formatted for FAT32 to commission the device. Also if the device is at least firmware 13.2 then you can use the sd card setup wizard in ecatcher which is located on the same page as your activation key.

#4

Perfect, I needed to upgrade my Ecatcher, I see it now.
Thank you