S7_1200 can bus connect to diesel genrator


#1

Hi dear friend
I had a question about HMS brand products.
My process is as follows:
I plan to read the data through the Siemens PLC 1200 series on the CAN network.
CM CANOPEN 021620-B

Diesel Engine Specifications:
DEUTZ
Engine Model: bf8m1015
Engine Control Module: EMR2

Is it possible with communication module 021620-b?
If yes please guide me how to configure this card
If not - what do you suggest?

And do the hms brand modules support the j1939 protocol?


S7_1200 can bus
#2

Hi dear friend
I had a question about HMS brand products.
My process is as follows:
I plan to read the data through the Siemens PLC 1200 series on the CAN network.
CM CANOPEN 021620-B

Diesel Engine Specifications:
DEUTZ
Engine Model: bf8m1015
Engine Control Module: EMR2

Is it possible with communication module 021620-b?
If yes please guide me how to configure this card
If not - what do you suggest?

And do the hms brand modules support the j1939 protocol?


#3

Hello sir,

Does the Deutz “speak” CANopen or J1939? For automotive, and especially diesel engines, J1939 is more common.

If it is not a CANopen device, you will want to go with something like a generic CAN or J1939 device. The device will depend on what exactly you want to do and what the fieldbus type is (Profinet, Profibus, EthernetIP). You may want to go with something like the Anybus AB7615 or the Anybus Communicator CAN. There is more info on J1939 here as well.

Kyle