Schneider PLC using Unitelway protocol over M2Web

Ewon Support eWON Cosy
#1

Good morning

I’m trying to connect a flexy 205 with a serial port fla 3301 to a Schneider plc using unitelway protocol. I set the card to rs485 and I used the 485 pinout suggested on the documentation.
I try to set up the communication unite in the flexy 205 like I was in the cosy 141 but I get error in the diagnostic of the flexy and cannot establish communication with the xip driver to log on to my plc .

Thank you

IMG_4264.jpg2448×3264 2.01 MB

IMG_4265.jpg2448×3264 1.67 MB

Capture101.PNG596×641 31.2 KB

#3

Hi @cedric_engelvin,

What exactly is the error? Can you provide a backup created with eBuddy and including the Support files?

What do you mean by “log in” to the PLC? Are you trying to download a program using software on a PC? If so, which software? I think the UNITE section you’re referring to is for the IO server and not for a transparent gateway.

Kyle

#6

Topic closed due to inactivity.