@anondupnvcam
Trying to send an email from a PLC through a Cosy 131
Hi Todd,
This should help you out
Never got the email with instructions
Solotek LLC
Todd Moch
Hi Todd,
Let me know if it goes through this time
-Tim
My interface does not look like this. I have Cosy 131 and Cosy 141. this looks like a flexy interface. Am I doing something wrong?
Todd Moch
Solotek Inc.
4012 Lockport St
Bismarck, ND 58503
Knowledge Base KB-0068-00 / Rev. 1.1
This looks like something I had to do with a Cosy 141 before.
How do I get to advanced settings on a Cosy 131?
Todd Moch
Solotek Inc.
4012 Lockport St
Bismarck, ND 58503
Hello,
You should be able to use this document for the advanced settings on a cosy 141 and the old UI of the 131. This document also explains the settings you need to change in the cosy config files.
If you have the NEW UI 13.0+ firmware you will need to expand Setup then go to storage and finally select edit COM cfg.
Let me know if this helps.
Best regards,
Deryck
I seemed to have lost the descriptions of my ewons in ecatcher. They are still there and work, just no descriptions.
How do I get them back?
still trying to get an email through the cosy. please help
I have made these settings plus
WANItfProt = 2
I can now ping but still cant get email through cosy
Please help
Hello You should be able to right click on the top column description bar and re-select it.
Is the ewons LAN set as the gateway for the device sending emails?
Hi Todd,
Just wanted to see if this was still an issue before I close this ticket
-Tim
No. I got it thanks to your help.