Set up I/0 Tags and Alarms

I am trying to set up alarm notifications (email and/or SMS) based on I/O inputs. Are there any KB articles or how to documents on setting this up.

I am using the Flexy 201 on the latest firmware and a 3401 card.

Hello @mmahana,
We have videos covering alarms here: https://ewon.biz/e-learning/library/flexy/alarming

You can also refer to chapter 7 of the user manual: https://websupport.ewon.biz/sites/default/files/um-0002-00-en-flexy-family.pdf

Regards,
Deryck

thanks. I will give this a shot.

Deryck

Im probably overlooking it, but I’m missing the step of associating a tag with DI either on the flexy base unit or the IO card.

Hello,

The diagram below should be pretty helpful for figuring out the Tag IDs for each of these


But it should be able to be setup with the following settings as an example.

The following script should also be helpful if you want to send out emails through the BASIC IDE instead:
IO Email.txt (1.0 KB)

Thanks Tim.

Got it working.

Regards,

**MIKE MAHANA | **INS

Application Engineering

800.889.1461 x129 | www.industrialnetworking.com

email_INS