Setting up an AB 7832

Anybus Support
#1

@anonathsibuc
Hi Aaron,

Can you check out the information in the zip file below?

hms-sci-1204-093.zip (3.2 MB)

#4

Hi Tim,

This project has been passed on to me, Aaron, thank you for your help. Ok im onsite now and was able to gain internet access but no cell reception here. They way it was explained to me once once I plugged everything up and configured the AB7832 in the config manager it should start working immediately. (Of course with a little more detail) Basically as a stand alone unit.

#5

Also Teamviewer is an option

#6

Hey Aaron,

Sorry for the delay, Can we try and go through this with Teamviewer when you’re available?

Thanks,
-Tim

#7

Ok lets do teamviewer

#9

Hey Tim

I lost you I removed the coupler. The TeamViewer closed out though

#10

Hey Aaron,

We were just going to recommend removing the coupler and going through that guide document and check with the person who previously set it up to make sure that you have the right settings

#12

Hi Aaron,

Just wanted to see if you were able to finish the setup for this device?

Best Regards,
-Tim