Hi,
Need some help with choosing a gateway to bridge between SLC505 (Ethernet) to another Ethernet/IP system.
The only issue is that the 2 Ethernet subnet is not within the same subnet. So we need to have a gateway with 2 Ethernet port that can “bridge” the 2 network.
Just wondering does Anybus have any product that can achieve the above?
Hi,
For the Anybus gateways it is alright if they are in two different subnets. You can use the Anybus gateway selector on the site to find the correct model fro your setup.
https://www.anybus.com/products/gateway-index