@anonurtoknea
I have two anybus wireless bolts. I currently have them connected to two computers. I can send messages from one computer to the other, but when I try to send from the other computer back, it errors saying it cannot connect. I have tried swapping all the hardware peices between the two bolts, and tried swapping which bolt was the server and which was the client. Regardless of what I change, I can always only send from the same computer. I have tried both bluetooth and WLAN.
Hello Claire,
I received the above message from sales and have a few comments and questions.
It sounds like you swapped the location of the bolts and are still having this issue. This leads me to suspect that the issue is on the PC and not with the Bolts. Perhaps you have a firewall blocking the requests on one of the PC’s. Try temporarily running a cable between the two PC’s and see if the issue persists.
Deryck