;************** GSD 1/15/2018 PowerXL ProfiBus DP Card ****************************** ;***************************************************************************************** ;* Vendor: Eaton Corp. * ;* Industrial Control Division * ;* W126, N7250 Flint Dr * ;* Menomonee Falls, WI, United States * ;* Customer Support:00 1 440-523-4400 * ;* * ;* Copyright © Eaton Corporation. All Rights Reserved. * ;* * ;***************************************************************************************** ;* * ;* Function: PowerXL ProfiBus Communication Card * ;* * ;***************************************************************************************** ;* * ;* * ;* * ;***************************************************************************************** ;***************************************************************************************** #Profibus_DP ;***************************************************************************************** ;************ General DP Keywords ****************************************************** ;***************************************************************************************** GSD_Revision = 5 Vendor_Name = "Eaton Corp." Model_Name = "DXG-NET-PROFIBUS" Revision = "1.0" Ident_Number = 0x0EF5 Protocol_Ident = 0 Station_Type = 0 FMS_supp = 0 Hardware_Release = "6.00" Software_Release = "02.00.0002" Redundancy = 0 Repeater_Ctrl_Sig = 2 24V_Pins = 0 Implementation_Type = "VPC3+S" ;***************************************************************************************** ;************ Supported Baud Rates ***************************************************** ;***************************************************************************************** 9.6_supp = 1 19.2_supp = 1 45.45_supp = 1 93.75_supp = 1 187.5_supp = 1 500_supp = 1 1.5M_supp = 1 3M_supp = 1 6M_supp = 1 12M_supp = 1 MaxTsdr_9.6 = 15 MaxTsdr_19.2 = 15 MaxTsdr_45.45 = 15 MaxTsdr_93.75 = 15 MaxTsdr_187.5 = 15 MaxTsdr_500 = 15 MaxTsdr_1.5M = 20 MaxTsdr_3M = 35 MaxTsdr_6M = 50 MaxTsdr_12M = 95 ;***************************************************************************************** ;************ Slave Specific Values **************************************************** ;***************************************************************************************** Freeze_Mode_supp = 1 Sync_Mode_supp = 1 Auto_Baud_supp = 1 Set_Slave_Add_supp = 0 Min_Slave_Intervall = 6 Modular_Station = 1 Max_Module = 1 Fail_Safe = 1 Max_Diag_Data_Len = 32 Modul_Offset = 1 Slave_Family = 1@Eaton@PowerXL DG1 Info_Text = "Eaton Drive, Slave Card on DPV1" Max_Input_Len = 60 Max_Output_Len = 60 Max_Data_Len = 120 ;***************************************************************************************** ;************ Prm-Text-Def_List ******************************************************** ;***************************************************************************************** PrmText = 1 Text(0) = "Disabled" Text(1) = "Enabled" EndPrmText PrmText = 2 Text(0) = "Local Control" Text(1) = "Fieldbus" EndPrmText PrmText = 3 Text(0) = "Local/Hand Control" Text(1) = "Fieldbus" Text(2) = "Mixed Interface" Text(4) = "NET, Local on Fault" Text(5) = "Dual Mode" EndPrmText PrmText = 4 Text(0) = "ProfiDrive" Text(1) = "Echo" Text(2) = "Bypass" EndPrmText ;***************************************************************************************** ;************ User-Prm-Data-Def_List *************************************************** ;***************************************************************************************** ExtUserPrmData = 1 "Parameterization Enable/Disable" Unsigned8 0 0 - 1 Prm_Text_Ref = 1 EndExtUserPrmData ExtUserPrmData = 2 "Min Frequency" Unsigned16 000 000 - 40000 EndExtUserPrmData ExtUserPrmData = 3 "Max Frequency" Unsigned16 6000 000 - 40000 EndExtUserPrmData ExtUserPrmData = 4 "Acceleration time 1" Unsigned16 30 01 - 30000 EndExtUserPrmData ExtUserPrmData = 5 "Deceleration time 1" Unsigned16 30 01 - 30000 EndExtUserPrmData ExtUserPrmData = 6 "Motor Nominal Speed (1PS)" Unsigned16 1450 300 - 20000 EndExtUserPrmData ExtUserPrmData = 7 "Motor Power factor (1PS)" Unsigned16 85 030 - 100 EndExtUserPrmData ExtUserPrmData = 8 "Motor Nominal Voltage (1PS)" Unsigned16 380 180 - 690 EndExtUserPrmData ExtUserPrmData = 9 "Motor Nominal Frequency (1PS)" Unsigned16 5000 800 - 40000 EndExtUserPrmData ExtUserPrmData = 10 "PNU927-Opern priority of params" Unsigned16 1 0 - 1 Prm_Text_Ref = 2 EndExtUserPrmData ExtUserPrmData = 11 "PNU928-Ctrl priority DOIO Data" Unsigned16 4 0 - 5 Prm_Text_Ref = 3 EndExtUserPrmData ExtUserPrmData = 12 "Profibus Operation Mode" Unsigned8 0 0 - 2 Prm_Text_Ref = 4 EndExtUserPrmData ;***************************************************************************************** ;************ User-Prm_Data ************************************************************ ;***************************************************************************************** Max_User_Prm_Data_Len = 25 Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00,\ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 Ext_User_Prm_Data_Ref(3) = 1 Ext_User_Prm_Data_Ref(4) = 2 Ext_User_Prm_Data_Ref(6) = 3 Ext_User_Prm_Data_Ref(8) = 4 Ext_User_Prm_Data_Ref(10) = 5 Ext_User_Prm_Data_Ref(12) = 6 Ext_User_Prm_Data_Ref(14) = 7 Ext_User_Prm_Data_Ref(16) = 8 Ext_User_Prm_Data_Ref(18) = 9 Ext_User_Prm_Data_Ref(20) = 10 Ext_User_Prm_Data_Ref(22) = 11 Ext_User_Prm_Data_Ref(24) = 12 ;***************************************************************************************** ;************ Diagnostic Data ********************************************************** ;***************************************************************************************** ;***************************************************************************************** ;************ Module-Definition-List *************************************************** ;***************************************************************************************** Module= "Standerd Telegram 1" 0xC2, 0x41, 0x41, 0x00, 0x40 1 EndModule Module= "Process Data Mod 1" 0xC2, 0x43, 0x43, 0x01, 0xFA 2 EndModule Module= "Process Data Mod 2" 0xC2, 0x45, 0x45, 0x01, 0xFB 3 EndModule Module= "Process Data Mod 3" 0xC2, 0x47, 0x47, 0x01, 0xFC 4 EndModule Module= "Process Data Mod 4" 0xC2, 0x49, 0x49, 0x01, 0xFD 5 EndModule ;***************************************************************************************** ;************ Modulstatus ************************************************************** ;***************************************************************************************** ;NOTE: Following section is Hard-coded in Macro and is not dependant on the parameters mentioned in the Excel sheet UnitDiagType=130 X_Unit_Diag_Area = 24 - 25 X_Value(1)="Slot 1: Module error" X_Value(2)="Slot 1: Wrong module" X_Value(3)="Slot 1: No module" X_Unit_Diag_Area_End X_Unit_Diag_Area = 26 - 27 X_Value(1)="Slot 2: Module error" X_Value(2)="Slot 2: Wrong module" X_Value(3)="Slot 2: No module" X_Unit_Diag_Area_End X_Unit_Diag_Area = 28 - 29 X_Value(1)="Slot 3: Module error" X_Value(2)="Slot 3: Wrong module" X_Value(3)="Slot 3: No module" X_Unit_Diag_Area_End EndUnitDiagType ;***************************************************************************************** ;************ DP extensions ************************************************************* ;***************************************************************************************** DPV1_Slave = 1 C1_Read_Write_supp = 1 C1_Max_Data_Len = 240 C1_Response_Timeout = 300 Extra_Alarm_Sap_supp = 0 Diagnostic_Alarm_supp = 0 Process_Alarm_supp = 0 Alarm_Type_Mode_supp = 0 WD_Base_1ms_supp = 1 Publisher_supp = 1 C2_Read_Write_supp = 1 C2_Max_Data_Len = 240 C2_Response_Timeout = 300 C2_Max_Count_Channels = 3 Max_Initiate_PDU_Length = 52 DPV1_Data_Types = 0 Ident_Maintenance_supp = 1 ;***************************************************************************************** ;************ Slot Definations ********************************************************** ;***************************************************************************************** ;***************************************************************************************** ;************ End of GSD File *********************************************************** ;*****************************************************************************************