Connect Aws Iot Through Mqtt Using Java

[pavithra]

Dear sir,
actually i’m facing error when i connet Aws iot through mqtt using java
error occured
1)mqtt-not connected (status -3 occur)
2)mqtt-Problem configuring SSL/TLS
when i’m using this thread program (Connect your Flexy to AWS IoT through MQTT using JAVA) after 2 sec automatically flexy goes to reboot
otherwise when it cannot reboot value published occur in realtime but value was not publish on AWS .
what was the solution for above explained issue

Thanks & Regards
Pavithra.

[deryck_hms]

Hello @pavithra ,

A status code of 3 is saying it it connecting.

MQTT STATUS Codes

Hello David, I believe the MQTT return values are standard mqtt return values. In the programming reference guide we have the following. 3.53.5 STATUS Syntax MQTT "status" Description This command allows the retrieval of the current MQTT client status. Possible values are: 3 The MQTT client is trying to connect. 4 The MQTT client is disconnected. 5 The MQTT client is connected. Connection process can last a little (depending on the broker, Internet connection...). If errors occur, they will …

Perhaps something is blocking the flexy from reaching the MQTT broker or your certificates are not setup correctly.