Hello
perhaphs a different question.
I have a Siemens PLC with IP-Address 192.168.11.90
Does that mean the Lan-IP of my eWon has to also be 192.168.11.XX?
I ended up with an IP Conflict between the eWon LAN and my computer’s LAN.
Any suggestions?
Thanks in advance
Jayson Lim
Your PC cannot be in the same subnet as the eWON when connecting remotely.
You are experiencing a LAN/LAN conflict.
You will need to change your PC’s network to be in a subnet that’s not in the same subnet as the eWON.
We have a comprehensive topic that goes over this issue as it’s a common issue that people run into when using 192.168 addressing, it’s located here:
Thanks Joe!
Solved the problem by disabling my wifi and using a phone hotspot instead.
Might be a temporary solution but nevertheless allowed the problem to be identified.
