Hi,
We have a flexy 205 that is connected to a 4G router on the WAN port. The flexy does not has a 4G card available here in Australia that is why we had to use a separate 4G router. The Flexy’s wan port setting is 10.0.1.3 and the 4G router 10.0.1.1. We also have a PLC (10.0.0.3) connected at the EWON’s lan port at 10.0.0.2. We have enabled data logging as well and we are sending data to Talk2m API. The 4G router has a web server interface and we wish to access this via VPN (eCatcher). Is this possible? If yes, please advise what are the necessary settings. Thank you.
Hello,
Unfortuntaly, there is no way to access any devices connected to the WAN port. The Unit is designed enable remote access to the LAN devices only, in order to protect the integrity of the WAN network.
If you are using the Flexy, you can try using NAT1:1 and Router simultaneously connect to the LAN side.
BE ADVISED Do not set the router IP to the LAN side. This will cause an IP conflict between the LAN/WAN, and you will lose connectivity.