Flexy 4G - FLB-3205 APN and GSM Pin

[Semilogical]

I’m using a Flexy 4G ATT module, FLB-3205. When configuring it needs a GSM Pin and an APN. Are those self generated or listed with ATT?

[hms_support]

@Semilogical

Those are listed with ATT in this case.

The APN is provided by the sim card provider and not self generated.
Typically the only field you will need to fill out when configuring the eWON for a cellular connection is the APN and everything else can be left blank.

In cases where there is an actual GSM Pin then you will need to contact the sim card provider for that as well.

For more information on setting up a Cellular connection with an eWON, please see the following topic:

Setting up Cellular Connection

The eWON’s GUI was recently overhauled so take a look at your firmware version in our eBuddy software to follow the appropriate process: Firmware version < 12.2S0 To setup the eWON Cosy to use Cellular, you will need to go through the internet wizard in the device’s interface and choose the modem as your WAN interface. To enter the device’s interface please follow this instructional video: https://youtu.be/viQR6U2qMHU ( @ 2:44 seconds, you will have a choice that says Modem) Select “Modem…