Hi there,
I have an Allen-Bradley Micrologix PLC connected to a 1761-NET-AIC module. The 1761-NET-AIC has a free RS-485 “Phoenix” style connector that uses Allen-Bradley’s DH485 communication. I have wired a custom cable following the RS485 Pinout shown in the Anybus 7072 manual. the other end of the cable is wired into the 1761-NET-AIC.
I cannot get the subnet to connect. I know that the Anybus 7072 configurator can be setup with DF1 master/slave, but I am also wondering if the Anybus 7072 will be able to communicate to the PLC using DH485.
Thanks,
-Nathan