Connect the Flexy205 to Omron Sysmac CP1H & NSJ8

Ewon Support Ewon Flexy
#1

Hello to all,
I would like to know how to make my flexy 205 communicate with
the following PLCs : Omron Serie CP1H
Omron Serie NSJ8
thank you

#3

Hi there,

Can you please confirm what communication protocol you are using? Modbus RTU (serial), TCP (ethernet), or something else?

Thanks,
Juliana

#4

I am using the TCP (ethernet)

#5

Thanks for that!

You can find at this webpages step by step documentation on how to setup your Omron PLC for either remote access or data aquisition:
Remote Access for Omron PLC
Data aquisition

If you run into issues, you can always create a ticket at https://support.hms-networks.com/hc/en-us and we’ll be more than welcome to help you.

Best,
Juliana

#6

Thank you very much for your help.
The PLC - Ewon communication has been successfully established.

#7

Awesome! Thanks for the update!

Best,
Juliana

#8

Another small question

I know that I can connect 16 Omron PLCs with FINS TCP IP protocol on a flexy205.

example:
H100#2,1,9,10.0.0.1
H100#5,1,9,10.0.0.10

But I don’t know why it doesn’t work on my flexy.
Is there any other way to do it?

Thanks

#9

Hi There,

16 Omron PLCs connected to 1 flexy? Interesting, I am not aware of that, but I will double check.

The format for the global device address is: FINS network, FINS node, IP or HostLinkId.

Are you entering the “H100#2” text as well?