Cosy 141 support - Tim

[Jean-Michel_Binette1]

Hi Tim,

Thanks again for your help this morning.

As previously discussed, please find enclosed the « before » and « after » of what I an trying to achieve.

You can contact me anytime

Thanks,

Jean-Michel Binette, ing.

Ingénieur automatisation

delta ewon_after.pdf (122 KB)

delta ewon_before.pdf (120 KB)

[Tim_hms]

Hi Jean,

Just to make sure, you already set all of the values from this post right?

Accessing Cosy 141 from Plant Network

@CabbottVoorwood Another option that you would have here would actually be proxying on the LAN (essentially port forwarding). As my colleague @hms_support mentioned, the COSY 141 does not support NAT 1:1 translations. What you could do however is forward FTP traffic to the LAN device via the WAN IP of the eWON. In order to use this solution however you will need to ensure to make a few configuration changes. Steps: Security Settings Navigate to the eWONs IP address -> Settings -> Mainte…

[Jean-Michel_Binette]

Hi Tim,

No since I need to know if it is TCP or UDP and then what ports need to be forwarded

Thanks

[Tim_hms]

Hi Jean,

You should be able to use either TCP or UDP. The following document will give more info. But it’ll be UDP port 1194 or TCP port 443

kb-0209-00-en-adresses-and-ports-used-by-talk2m.pdf

[system]

Topic closed due to inactivity.