Cosy Multiply VLAN

[Zach_HMS]

@anon9337148717
Hi,

This topic should be able to help you setup access multiply vLANs thought the VPN with the cosy.

Multi Lan Subnets

@KenBud The LAN switch of the eWON is not managed so you will not be able to configure any sort of VLANs on that hardware. Now one thing you could theoretically do is install a managed switch behind the eWON. This could in fact have the VLANs that you are after. Now the real challenge however is that you would need to manually add routes to the host connecting over eCatcher each time you connect telling it to get behind the eWON. Example: eWON LAN: 192.168.1.X/24 VLAN 1: 192.168.2.X/24 …

[Kevin_hms]

Customer called back and stated they set up the routes using different IP and SUBNet ranges. They are able to establish connection when locally connected via eBuddy. However, when attempting to eCatcher, the devices do not show up within eCatcher.

I advised the customer to set all IP’s into the same ip/subnet range, and use a layer3 switch to test further connections issues.