EWON-COSY 131 NAT Settings

Ewon Support
, ,
#1

Hi,
I have modified the config of a Cosy 131. I have looked at some previous setup posts on the forum, but after setting the NAT to NAT 1:1 For WAN and setting the WANItfProt to 2 and FwrdToWAN to 1 and saved and rebooted on a number of occasions. (I have followed post on August 2020)
None of these changes have given me a connection through the EWON to site network.
The Outside IP address is not used.
I cannot ping or confirm in any way that the connection is working. None of the NAT system counters have changed at all.
Is there any other information I may be missing in the reference manual. Although the “Itf” and the “Frwd” settings were not in there.
Everything on the VPN side works fine, but we need to give the people on the local site network access without disconnecting cabling.

Regards,
Steve

#2

Hi,

Could you create a backup of the the Cosy using eBuddy and include support files.

If this is a Cosy 141 (it is a metal box) then that one does not have the ability to do NAT 1:1.

#4

Hi Zach,
I will double check the information and get a backup from the site.

Thanks