Flexy to Mitzi FX2N PLC Via GOT1000


Has anyone managed to collect data from a FX2N in to a Flexy using a GOT1000 or 2000 as a passthrough.
I know you can communicate directly to a FX2N via a Flexy Serial, but in this instance we have a GOT1000 HMI occupying the Serial Port on the PLC. Is there a way to get data out of this system? I know I have in the past gone through a HMI on a E300 to an AS PLC.

Any help would be great.



Hi CarlD,

I’m not familiar with the GOT passthrough. I have only seen the serial port used for the FX series. Is it the RS-422 base unit programming connector that’s being used by the HMI?

Hi Kyle

Yes the GOT uses RS-422 to talk to the PLC.


Hi @CarlD,

Sorry for the delay, I was out of the office last week. I would recommend creating a support case so we can escalate it to the Ewon team and see if they have any suggestions.