Hi Kyle,
I do dis with CMD in Windows:
I can receive ping from PLC and HMI.
I only have two networks:
In eCatcher i have this:
What is wrong?
Thanks
Hi Kyle,
I do dis with CMD in Windows:
I only have two networks:
In eCatcher i have this:
What is wrong?
Thanks
Hi Kyle,
I have this PLC:
Regards
OK this is good that you can ping the PLC now.
Can you change this to All Protocols:
Also, change BroadcastForwarder to 1 here:
The Omron PLC looks like it supports OPC UA, so you could use that for syncing the tags from SQL.
Please see this page for more info about connecting to the S7-1200:
Hi Kyle,
I made the chang, but doesnât work.
What is the problem? The cable?
Regards
Philip
Hi Kyle,
I only connect when i put the ethernet cable in my PC only.
The configuration of accessible devices in TIA PORTAL from TAP Adapter V9 is:
What is the problem?
Thanks.
Are you using the latest version of eCatcher?
Please note, you can contact your local distributor or HMS support directly at +46 35 17 29 20.
If you are using the latest version of eCatcher and your ewon firmware is up to date, if you follow these instructions, this should be working:
Hi Kyle,
Iâm using V6.4.1 Build 28512
Hi Kyle,
I contact my local distributor, but donât appear any nodes from TIA Portal. The software doesnât recognize any device.
I do not understand what is going on.
Regards,
Philip
If your local distributor cannot help, you can open up a support ticket with your local HMS support team at https://mysupport.hms.se
Hi Kyle,
Can you access to my PC via TeamViewr and help me?
Thanks
You need to contact your local distributor or HMS office as hms.how is run by the Americas office. Please use the link or phone number I have given you in prior posts.
I Kyle,
Itâs not necessary. I resolve all the problems.
The problem is i have a VPN from my University that made a conflit with th VPN of eWon.
Thanks for all support that you give to me.
Regards,
Philip