Here we have four anybus bolt connected to four different plc as client.
And one anybus bolt as access point connected to a PC (windows 11), in this PC we installed wincc scada (Siemens)
Our all client end (all four anybus bolt) data read and write is working perfectly.
Now when we remove access point power supply off we need to fetch alarm in wincc data alarm data base. Here we have problem how to check the status of anybus wireless bolt communication status on scada
Access point any bus bolt ip we had set as 192.168.0.99, subnet mask 255.255.255.0 and gateway 192.168.0.1
SSID IP we observe on PC is 192.168.0.104
Our PC ip4 set as 192.168.0.189
Help us on this point, if need any more information, plz feel free to write us
Regards
Sibasish