Remote Access through Ewon

Ewon Support Ewon Flexy
#1

Hello

Anyone could guide me how to connect Ewon with below network

  1. I want to remotely access S7-315 PN/DP or HMI
  2. I want access S7-1500 or HMI
    3.Want to access Schnieder PLC or vijeo cetect
  3. All these 3 PLC, HMI or SCADA will be connected to PC TIA program
#2

Hi Razim,

You can find a step-by-step setup guide for the Flexy here: https://www.ewon.biz/technical-support/step-by-step-guide/preparation?ordercode=Flexy20500_00MA

It will walk you through the physical installation as well as software configuration to allow remote access. The configuration section has several videos that should be helpful. If you have any questions following this documentation, let us know so we can address them.