Hy all,
i just want to understand where is my mistake : i defined a local lan in 192.168.0.XX, versus remote lan 192.168.1.XX, in one case with à FLEXY router it work fine, on a other site with a COSY router i get the conflict error.
I don’t understand what’s happen…, i gave include 2 screenshot of my configuration.
Thanks for your help.
Regards.
F.CHEVALIER
Hello @fchevalier!
eCatcher is only notifying you that you have already defined that address within a previously specified LAN device. Because 192.168.0.55 is defined with a /24 subnet mask, it actually encompasses all of the addresses between 192.168.0.1 - 192.168.0.254. The subnet mask is completely optional – if you wanted to explicitly define the LAN devices, you could set their IP without a subnet mask and you would not see that error. Being able to add a subnet mask lets you segment your eWON’s LAN down even further if that is what you desire.
Please let us know if you have any further questions!
Best,
Ashley
1 Like
Hello Ashley
Thanks for your help
It work
Regards
François
Hello Ashley,
It’s so simple i’m feeling stupid…
Thanks for your help
Best regards
François