Hello,
I forget user name and password for my Ewan. How I can reset to factory usine?
Thanks
You can perform a level 1 reset to reset only the username and password back to the default (adm / adm).
Page 23 of the Cosy 131 manual reviews the level 1 reset process.
Manual Instructions:
How do I generate a first level reset?
• Power the unit OFF and ON again
• Immediately press and maintain the reset button. The LED labeled BI1 turns ON.
• Wait approximately 30 seconds until the USR LED flashes RED 1x per second.
• Immediately release the button (if you don’t, you would reach the second level reset
phase). The LED labeled BI1 turns OFF.
• Wait approximately 30 secs until the reset procedure is completed.
• The eWON restarts automatically and the unit is ready to be used, the USR LED flashes
GREEN slowly.
NOTE:
It’s important that you release the reset button while the USR LED flashes red otherwise you will perform a complete factory reset (Level 2 reset)